Why Is Everyone Talking About Door Handle Replacement Right Now
Door Handle Replacement
Door handles may seem like something minor however, if you don't like the style or design of them, or are finding them difficult to use then it's time to replace them. With a bit of patience, you can install the new handle in no time.
Modern door handles are equipped with cover plates that hide the screws for an attractive appearance. However, you'll need to attach them separately if your new handle doesn't have them attached already.
Remove the Old Handle
The door handle is not just a decorative feature for your home, but it's also an important safety feature that lets you to lock and unlock the door. As time passes, the door handle may become loose or feel a bit loose. It might be beginning to appear worn out and old. repairmywindowsanddoors is a sign that it's time to replace your door handle.
If your door handle is becoming difficult to use, it may be time to replace it. This is an issue because it means you can not lock or unlock your door which could pose a security risk for you and your family.
It's also an excellent idea to replace your door handle if it is damaged or broken. A damaged or broken door handle could be extremely dangerous, particularly in the event that your children or senior family members have difficulty opening it and end up trapped inside. It's a good thing that it's easy to fix a broken door handle by simply replacing the handle that was broken.
Modern door handles are generally standard sizes and will fit any door. If you're unsure if your new door handle will work, try removing the old one and determining the holes in its housing. This will allow you to purchase the right size door handle.
The most straightforward method to take off your old door handle is to unscrew it from the door. This is usually done using a screw driver. Some door handles come with an enclosure plate that hides the screws used to mount them. You'll need to remove this to get to the screws. After removing the old handle, make a note of the way in which the spindle is connected. This will assist you in aligning the new handle.
You can also remove the door handle by removing the latch mechanism. You can use a screwdriver to remove the door handle. But, you'll have to locate the small latch that is located on the edge cut piece. After removing the latch, unscrew the handle and the strike plate. Then, remove the latch from the door's edge.
Remove the Strike Plate
If you are replacing your handle, you'll also be required to replace the latch plate, which is the hole which the door's latch hooks into when it closes. The box that the new handles arrive in will have two latch plates: either a rectangular or circular (see the diagram above detailing door handle parts). If you have an rectangular latch plate, you can replace it with a round one. This will allow the latch to hook into the strike plate and make the handle easier.
The first step is to remove the screw that's holding the latch plate that was previously in place. The screws can be very tight and will require some force to loosen. If you are able, it could be beneficial to have another person help with this process.
The latch plate should be removed from the door once the screws have been removed. If the latch plate is stuck or refuses to move, use a small hammer to scrape the edges. This can help loosen the plate.
You can now move on to creating the new door strike plate for installation. Utilizing the screws made of wood that were included with your new handles, screw the latch plate onto the inside of the doorjamb. Do not overtighten your screws as this could cause damage to the strike plate.
If you're not sure if the latch plate is in the correct position You can try closing and opening the door to determine whether it latches and closes correctly. If not you'll have to adjust the strikeplate up or down, forward or back until the door closes correctly.
If the door continues to move or jiggles, you may have to enlarge your latch hole on the strike plate. This is more prevalent on older doors. It can be caused by wear and tear hinges that are too shallow, the wrong size latch, or a damaged strike plate. If this is the case, follow the exact procedure to adjust the strike plate, using an iron file instead of an hammer and chisel.
Remove the Latch
The latch is the angled metal piece that moves in and out of the hole that runs along the inside edge of your door. The latch is pushed forward when you turn the handle. It also hooks into a hole on the door's frame so that the door is closed. If your door shakes when you close, a new latch may be all you need to fix the problem.
It's difficult to identify the screws that hold the latch to the door, but there's usually a tiny slot on the trim plate that allows you to insert a screwdriver and remove it. After taking off the trim plate you should be able to take off the latch as well as the bolts that hold it in place and the spindle in position.
If the latch isn't easily removed using a paperclip or tool to take it off the handle mechanism. Insert the item into the latch's slot that is recessed and gently move it around until you feel the latch and handle start to separate. You may have to repeat this process several times before you are able to take the latch off.
After the old latch has been removed and the old latch is removed, you should be able to insert the new latch into the slot without issues. Make sure that the latch is properly positioned in the slot and is aligned with the screw chambers and then use your new screws to secure it to the strike plate and door frame.
Before installing the new handle, be sure to measure your existing backset (the distance from the centre of the big hole on the front of the door to the edge). Also, ensure that the size of the latch on the new handle is in line with this measurement.
If you are replacing the handle or latch, or if your old lock cylinder is damaged, then you will need a new one. If you're not changing locks the new latch will fit in the existing recess and be compatible with your current keys. Choose a latch that has rectangular cover plates that match the handles you have.
Remove the cover plate
Door handles may begin to look worn over time, but if you replace them with a modern lever-on-rose design, it's an easy and quick DIY project to decorate and will improve the overall look of your home. You can purchase complete sets with matching escutcheons, privacy adaptors and escutcheons.
To replace the door handle inside remove the cover plate (or rose) that covers the screws and mechanism. Utilize a flathead to take off the plate. It could have an opening on one edge or be held by pins.
After the cover plate is removed, remove the screw that holds the inside handle in place, and then set it aside. Remove the screws that hold both the inner and outer plates. You can loosen them by using the help of a Philips Screwdriver. Remove the plates that hold the inner plate and latch from the door. Set them aside.
Most doors have an opening between the jamb of the door and the inner edge of the frame that makes room for a handle, but not all have. If yours doesn't, you will need to drill a hole through the door. This is the same process as opening a door locked however you'll need to be extra careful not to harm the door's frame or frame.
Installing new screws for the door knob is necessary after the holes have been made. Make sure to buy the same size as the old ones, so you don't end up with an handle that is either too tight or loose. It's also necessary to install the new latch plate and strike rod, which aren't included with most door handle sets.
If you're in search of a reliable replacement for your interior door handle set look no further than the Amazon's Choice FAERSI two-piece chrome-finished handle set. It's a factory fit and has received a plethora of 5-star reviews from happy customers. It's a great option to replace worn or damaged door hardware on your Chevy.